COLUSA COUNTY CALIFORNIA FIRE PROTECTION WATER TANKS

Get Your Best Price, Fill Out the Contact Form Or Call Now

 

Tank Code US Gallons Diameter Cost Per Gallon

XL 08/02

10,000 15′ 5″ $1.05

XL 13/02

15,000 19′ 9″ $0.86

XL 15/02

20,000 22′ 0″ $0.77

XL 23/02

30,000 26′ 4″ $0.67

XL 30/02

40,000 30′ 9″ $0.60

XL 40/02

50,000 35′ 2″ $0.56

XL 50/02

65,000 39′ 6″ $0.50

XL 50/03

97,148 39′ 6″ $0.45

We offer fire flow and fire protection water storage solutions that are designed to comply with the Colusa County requirements, NFPA standards for fire protection as well as the state of California Fire Code and California Building Standards Code.

 

There are seven fire protection districts serving Colusa County providing inspections for permitting along with the City of Colusa fire department. See the fire and building codes for Colusa county as well as the fire sprinkler and fire flow requirements.

SECTION 507 FIRE PROTECTION WATER SUPPLIES

 

507.1 Required water supply. An approved water supply capable of supplying the required fire flow for fire protection shall be provided to premises upon which facilities, buildings or portions of buildings are hereafter constructed or moved into or within the jurisdiction.

[all_in_one_contentSlider settings_id=’1′]

The Permit Process in Colusa County California is Regulated Locally and by
The California Building Code

901.1 Scope (Link)

 

The provisions of this chapter shall specify where fire protection systems are required and shall apply to the design, installation, and operation of fire protection systems.

 

901.2 Fire protection systems

 

Fire protection systems shall be installed, repaired, operated and maintained in accordance with this code and the California Fire Code.

When a Building or Property Needs Fire Protection Water Storage to Comply with the Fire Code, We Provide the Tank with the Necessary Components

 

1. Determine the local authority requirements for capacity, accessories, etc.

 

2. We will design the fire protection water storage tank to the project needs as well as develop an engineering package for the permit.

 

3. Our optional engineering package for your project can be used to obtain the fire protection tank permit.

 

4. Our accredited installation network will deliver and install the Pioneer Water Tank onsite.

Pioneer Water Tanks are engineered to NFPA 22 standards for water storage for fire protection. The tank body and roof are made of Zincalume® Steel, which is proven to withstand fire immersion. Our full lines of firefighting adapters and nozzles are compatible with fire hoses across North America.

Pioneer Water Tanks can be configured for cyclonic and seismic conditions, as well as heavy industrial zones. Additional accessories are available for different compliance needs. Outfit your tank with anti-vortex fittings and firefighting adapters for quick access during a fire emergency.

Commercial and residential properties that do not have an adequate water supply for local authority requirements can be supplied with a water storage tank for a building permit. We offer optional engineering packages for the permit process when needed. Our engineering packages are based by the project and application.

WATER TANK STANDARD INCLUSIONS

AQUALINER® FRESH

The first antimicrobial tank liner in the world, our state-of-the-art five-layer AQUALINER® Fresh keeps your water fresher for longer with embedded Sanitized® Silver technology. With a life expectancy of 65 years, the AQUALINER® Fresh is designed to fit the Pioneer Water Tank to prevent contamination.

GEOTEXTILE UNDERLAY

Our geotextile underlay is the ideal way to protect your AQUALINER® Fresh from being compromised by sharp objects that may be caught inside your water tank.

SACRIFICIAL ANODES

Our sacrificial magnesium anodes significantly extend the life of your water tank by protecting the tank from corrosion. Made from magnesium, the anodes erode in place of the water tank, thereby protecting the steel and allowing the tank to last longer than other systems. Pioneer Water Tanks recommend your anodes be replaced every 10 years so you can enjoy the benefits of your tank for life.

SUPER SEAL

Reduce the number of contaminants to protect your precious water supply with Pioneer Water Tanks’ high-density foam sealer.

6-INCH DIAMETER OVERFLOW

Pioneer Water Tanks provides a 6” diameter overflow downpipe, the largest overflow system on the market. The overflow size moves excess water away from the tank quickly to effectively reduce pressure on your tank and avoid costly damage to your tank components.

The NFPA 22 standards for water storage for fire protection sets the minimum requirements for the design, construction, installation, and maintenance of water tanks and their accessories.

Chapter four of the NFPA 22 Standards for Private Fire Protection covers the general requirements while the other chapters go into depth by the type of water tank.

1. Capacity and Elevation (4.1):

The size and elevation of the water tank are determined by the individual property conditions, after due consideration of all of the factors involved. Typically the local fire marshall will determine the fire flow requirements that decide the capacity of tank needed for the property to be permitted.

2. Water Sources (4.2):

The water source for filling the tank needs to be adequate and dependable, with allowance for its reliability in the future. If the water supply from a public service main isn’t adequate in quality, quantity or pressure (measured in fire flow for fire protection)- an alternative water source needs to be provided (like an extra water storage tank on the property).

One example of San Diego County Fire Authority Minimum Fire Flow Requirements for Fire Protection

One example of San Diego County Fire Authority Minimum Fire Flow Requirements for Fire Protection

3. Location of Tanks (4.3):

The tanks need to be located so that the tank, as well as the structure, are protected from fire exposure in accordance with NFPA 22 standard chapter 4.3.1.1 through 4.3.1.5.

4. Tank Materials (4.4):

Water tank materials are limited to steel, wood, concrete, coated fabrics and fiberglass-reinforced plastic tanks.

5. Workmanship (4.5):

Tank manufacturers are expected to comply with these requirements set forth as well as providing structures that are proven reliable under all specified conditions. Manufacturers will replace all defective parts due to faulty materials or workmanship as well as provide careful inspection during fabrication and install.

Learn More About Our Warranty

6. Plans (4.6):

Contractors will provide stress sheets, plans required, the authority having jurisdiction for approval or for obtaining building permits and licenses. The jurisdiction for approval of layouts will be given complete information covered in NFPA 22 standard chapter 4.6.2.2.

We provide optional engineering packages per project, based on the project needs. Our engineering includes a state certified engineer wet-stamped cover letter to get started for permitting.

7. Tank Contractor Responsibility (4.7):

Experienced contractors will handle all of the necessary work with careful workmanship and expert supervision. The manufacturer shall warranty the tank for at least 1 year from the date of completion. Once the tank is complete, the contractor will test the tank for being watertight and notify the authority for official inspection. Contractors will remove and dispose of any trash on-site, in accordance with NFPA 241.

Our accredited dealer and installation network are held by contract to the Pioneer Water Tank workmanship standards and expert project supervision. We offer a 20-year warranty from date of completion.

8. Attachments to Tank Structures (4.8):

If the water tank will be used to support signs, flagpoles, steel stacks, etc, they need to be specifically designed for that purpose. Each tank shell manway will have a confined entry requirement signposted.

We offer a full line of optional engineered accessories for multiple water storage applications, including firefighting adapters and nozzles manufactured to NFPA standards.

Go to Our Full Line of Accessory Options

9. Lightning Protection (4.9):

Water tanks will be installed according to NFPA 780 to prevent lightning damage.

10. Strength (4.10):

The tank material is required to be without defects that affect its strength or service. The workmanship quality of the tank will be so that defects or injuries aren’t produced during the tank manufacturing or installation. The tank structure needs to have the required strength and rigidity set forth.

Pioneer Water Tanks are third-party tested, certified and warranty-backed for everything stated in our engineering packages.

11. National Standards (4.11):

Only tank materials produced and tested in accordance with the requirements of a recognized national standard and within the mechanical (strength), metallurgical, and chemical limitations of one of the material grades specified by NFPA 22 will be permitted.

Pioneer Water Tanks are certified as being in accordance with NFPA 22.
See the Full Assessment

12. Loads (4.12):

Water tank load requirements
a. Dead Load: The dead load will be the estimated weight of all permanent construction and fittings.

b. Live Load: Under normal conditions, the live load will be the weight of all the liquid when it overflows the top of the tank. Provisions will be made for temporary stresses during installation.

c. Wind Load: Under normal conditions, the wind load or pressure will be assumed to be 30 lb/ft2 (147 kg/m2) on vertical plane surfaces, 18 lb/ft2 (88 kg/m2) on projected areas of cylindrical surfaces, and 15 lb/ft2 (73 kg/m2) on projected areas of conical and double-curved plate surfaces.

d. Earthquake Load: Water tank structures will comply with the local building code for seismic requirements.

e. Balcony, Platform, and Ladder Loads: All of the tank structural parts and connections will be designed to withstand loads they will be used for. These specified loads are not be required to be combined with snow loading.

f. Columns and Struts: All steel columns and struts will be designed in conformance with AWWA D100.

g. Stress Increases: When wind or earthquake loads are considered in calculating stresses, the maximum permissible increase in the working unit stresses will be one-third, provided the resulting section isn’t less than what’s required for the dead and live loads.

h. Roof Construction: The tank roof will be designed to withstand the forces anticipated during the installation, inspection, testing, and maintenance.

Pioneer Water Tanks are certified as being in accordance with NFPA 22. We offer optional upgrades for seismic and industrial applications.

13. Welding (4.13):

Welding will be completed in accordance with AWWA D100, NFPA 241, and ASME Boiler and Pressure Vessel Code, Section IX.

Pioneer Water Tanks are third-party tested, certified and warranty-backed for everything stated in our engineering packages.

14. Roof Standards (4.14):

All tanks need a roof. The OSHA-compliant standard railing will be placed on the roof manholes and other accessories that require access.

This is an example of a roof configuration of a Pioneer Water Tank.

This is an example of a roof configuration of a Pioneer Water Tank.

15. Roof Vent Standards (4.15):

Steel rooftops that are essentially airtight need a vent above the maximum water level with a corrosion-resistant screen to prevent contamination.

Pioneer Water Tanks have a full line of ventilation options for our water storage systems.

Pioneer Water Tanks have a full line of ventilation options for our water storage systems.

16. Test Reports (4.16):

Test reports and certificates of compliance will be maintained by the vendor and made available for review by the purchaser.

Pioneer Water Tanks’ test reports and certificates of compliance are ready for permitting packages by the project.

See the Entire Assesment of Pioneer Water Tanks to NFPA 22, Link Below

KEEP WATER FRESH AND CLEAN FOR LONGER

Combine your drinking and fire water storage in one cost-effective, space-efficient tank. Pioneer Water Tanks has partnered with SANITIZED® – the world leading institute in antimicrobial hygiene technology – to create the AQUALINER® Fresh. The AQUALINER® Fresh is a new cutting-edge tank liner that works to protect against the build-up of mold, algae, mildew and biofilm.

The advantage of harnessing world-class technology from the Swiss-based company SANITIZED® in a water tank application is that the interior surfaces of your tank are actively working against bacterial growth.

NSF-61 CERTIFIED FOR DRINKING WATER

The AQUALINER®  Fresh tank liner used in Pioneer Water Tanks, is third party NSF 61 certified for drinking water storage. The National Safety Foundation standards for drinking water are developed by a team of scientists and industry experts to guarantee products worldwide.

BUILT TO LAST 65-YEARS

The AQUALINER® Fresh is manufactured to last 65-Years and features excellent flexibility, high tensile strength, waterproof, and abrasion resistance. The AQUALINER® Fresh retains the Globally Patented Multi-layered PP/PE textile with a spun-woven multifilament polypropylene (PP) construction for ultimate durability.

SANITIZED® ANTIMICROBIAL TECHNOLOGY

AQUALINER® Fresh is the first water tank liner to be embedded with Sanitized® antimicrobial technology. The black PE film layer of the AQUALINER® Fresh that touches the water is embedded with antimicrobial protection by Sanitized® to keep your water fresh and clean for longer.

All Pioneer Water Tanks can be orientated to suit client requirements. We have the flexibility to insert Nozzles (inlets and outlets, etc) through the tank wall, roof or floor. They can adapt to most flange tables – BSP, D, E, DN, DIN or ANSI. We include our standard polyethylene fitting with an option to upgrade to galvanized steel or brass fittings. Our commercial line of nozzles range from 2” – 16” diameter with even more options outside of this range.

Nozzle Orientation

Nozzle orientation is an important component in tank design. The position and size of the nozzles will determine the “effective” or usable storage capacity. Before we manufacture any commercially designed water tank we create a nozzle orientation drawing. This allows you (or the engineer) to nominate the position of each nozzle – inlet, outlet, overflow etc. to match up with existing or new pipework.

Pioneer Water Tanks are engineered to NFPA standards for water storage for fire protection. The tank’s firefighting adapters and nozzles options are compatible with fire hoses in America. Our tanks come standard with poly outlet and inlets but they can all be upgraded to our brass options. Additional accessories are available for different compliance needs. We stock a range of firefighting fittings that provide instant access to fire reserve storage in case of an emergency that comply with NFPA 22 standards. Turn your water tank into a water source for firefighters with hose fittings.

Choose the Capacity Size of Fire Protection Tank That You Need

Tank Code US Gallons Diameter

XL 08/02

10,000 15′ 5″

XL 13/02

15,000 19′ 9″

XL 15/02

20,000 22′ 0″

XL 23/02

30,000 26′ 4″

XL 30/02

40,000 30′ 9″

XL 40/02

50,000 35′ 2″

XL 50/02

65,000 39′ 6″

XL 50/03

97,148 39′ 6″

Pioneer Water Tanks offers our industry leading 20 –year conditional warranty on the tank and liner. Commercial projects are warrantied per project, based on the application and applicable requirements.

Read the entire warranty below.

FIRE PROTECTION WATER SOLUTIONS

Why Choose Pioneer Water Tanks for Fire Protection?

1. Pioneer Water Tanks are in California as the longest lasting tank with firefighting adapter options that can also double as a drinking water source. Our fire protection water tanks work well with local fire code authority requirements and our optional engineering packages make the permit process easier. Buildings are required to have fire sprinkler systems installed, according to the County fire and building codes. If fire flow is not achieved with the providing water supply, additional water storage may be needed for fire code compliance.

2. Pioneer fire-protection tanks copmly with NFPA National Fire Protection Association standards, as required by the California Fire Code, for fire-water storage. Fire protection packages come with a complete set of engineer-approved drawings.

3. Pioneer offers a wide variety of water-storage options with capacities ranging from 5,000 to 1,000,000 Gallons. Pioneer Water Tanks are backed by our industry-leading warranty, so you can rest easy knowing you have a fire-protection solution that will last.

4. Pioneer Water Tanks are made of Zincalume® steel that has been proven to withstand fire immersion and resist corrosion, ensuring the safety of your water supply in even the worst emergencies. Our full line of anti-vortex and fire-fighting adapters ensure water is always available for quick access during a fire emergency.

5. Pioneer Water Tanks’ 30-Year dedication to providing the longest-lasting water storage that is always ready, works well for the vast and varied environments of California with the high risk of fire. Our tanks are used as a water source for firefighting for properties without any other water source and as a water source for fire departments. Our standard capacities and accessories are quoted to the project requirements to get you the best price possible.

Fire Protection Water Tanks, California

916-287-8873